Contactor PM12-040151 400 V

Ofertă disponibilă
Magazin	Preț	Ofertă
Magazin 1	179,59 lei	Vezi oferta

🔔 Anunță-mă când scade prețul

Prețurile sunt actualizate zilnic, dar pot apărea diferențe din motive tehnice între prețul afișat aici și cel de la magazin. Prețul final, stocul exact, livrarea și returul le afli cu click pe butonul „Vezi oferta”.

Caracteristici

Brand	Iek
Categorie	Aparataj electric industrial

Descriere

PM12 AC contactors for load currents from 10 to up 63 A (AC-3) are intended for actuating, shutting down and reversing of asynchronous electric motors equipped with a short-circuited rotor for the applied voltage limited to 660 V (AC-3 application category). They can be also used for remote control of lighting, heating circuits and various low-inductance loads (AC-1 application category). All unit types per load currents limited to up 40 A have a single group of auxiliary NO or NC contacts.

Types per load currents exceeding 63 A have two contact groups (NO and NC).The PM12 contactor is a well-known brand in the market. PM12 IEK - compliance of mounting dimensions, PM12 series. The best performance among manufacturers PM12 performance - switching wear resistance is four times higher.

Rated control supply voltage Us at AC 50HZ: 400 Rated control supply voltage Us at

DC	- Rated operation current Ie , 400 V: 40 Connection type auxiliary circuit: EV000415 Number of auxiliary contacts as normally closed contact: 1 Number of auxiliary contacts as normally open contact: 0 Nominal operating AC voltage
Ue	230, 400, 660 Rated insulation voltage
Ui	660
Rated surge voltage	6 Conventional Short Circuit Current
Inc	3000 Overcurrent Protection - Fuse gG: 50
Tightening moment	2,5 Control voltage ranges at actuation
Uc	0,85...1,1 Flexible cable without tip: 4...16 Control voltage ranges at release
Uc	0,3...0,6 Hard cable without tip: 10